Home > Products > Automatic control valve >

100X Hydraulic float control valve for water level

100X Hydraulic float control valve for water level

100X Hydraulic float control valve for water level
100X Hydraulic float control valve for water level100X Hydraulic float control valve for water level
CategoriesAutomatic control valve
AlbumView larger image
BrandJinbin Valve
Model100X-16
Standard or NonstandardStandard
StructurePressure Reducing
PressureLow Pressure
PowerManual
MaterialCasting
Temperature of MediaNormal Temperature
MediaWater
Port SizeDN32-DN600
ApplicationGeneral, Water Supply
Unit PriceUS $ 20 / piece
FOB portXINGANG PORT
Terms of PaymentL/C, D/A, D/P
Update Time2018-12-18
Detail Information

Remote control float valve

100X Hydraulic float control valve for water level

Size: DN 50 – DN 600

Flange drilling is suitable for BS EN1092-2 PN10/16.

Epoxy fusion coating.

100X Hydraulic float control valve for water level

Working Pressure

10 bar

16 bar

Testing Pressure

Shell: 15 bars; Seat: 11 bar.

Shell: 24bars; Seat: 17.6 bar.

Working Temperature

10°C to 120°C

Suitable Media

Water, oil & gas.

The test media is water in room temperature.

100X Hydraulic float control valve for water level

100X Hydraulic float control valve for water level

No.

Part

Material

1

Body

Ductile iron

2

Bonnet

Ductile iron

3

Seat

Brass

4

Wedge coating

EPDM / NBR

5

Disc

Ductile iron+NBR

6

Stem

(2 Cr13) /20 Cr13

7

Plug Nut

Brass

8

Pipe

Brass / Stainless steel

9

Ball/Needle/Pilot

Brass / Stainless steel

If need the drawing details, please feel free to contact.

Feature:

1. Work stable and reliable and big flow pass.

2.  Disc open quickly and close slowly without water hammer.

3. High precision reducing regulator with large range.

4. Sealing performance and long service life.

100X Hydraulic float control valve for water level

100X Hydraulic float control valve for water level

100X Hydraulic float control valve for water level

1. Recommend to install exhuast valve in pipe system to make sure the steady working.

2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)

Please send your message to us
*We will reply your inquiry to this Email as soon as we see it
*Email
Name
Tel
*Title
*Content

Agree to use terms of service

Subscribe to our newsletter & be in touch.
subscription