Mai riƙe damfar bawul mai nauyi
Bawul ɗin Toshe Mai Nauyidamper ɗin ruwa
Bayanin Fasaha na Bawul ɗin Filogi Mai Nauyi
1. Hanyar sarrafa bawul: sarrafa filin, sarrafa nesa
2. Ana yanke bawuloli a lokacin gaggawa kuma ana buɗe su ta atomatik ta hanyar guduma mai nauyi (mai nauyin da aka saba amfani da shi)
3. Yanayin sarrafa bawul: Gilashin Wind
4. Lokacin aiki: 10-20s
5. Siffar hatimin bawul: hatimin iskar gas, iskar gas mai matsin lamba (0.1Mpa) ana allura daga ƙarshen waje don samar da hanyar shiga tsakanin farantin bawul da firam ɗin ƙofar, kuma sAn cimma nasarar cimma burin. Mai buƙata yana samar da fanka.Tushen kwararar iskar gas: izinin da ke tsakanin farantin bawul da ɓangarorin biyu na jikin bawul ɗin shine 2 mm, sannan a ninka shi da tsawon hatimin da ake buƙata, don haka ana ƙididdige yankin fitar iska.Yankin fitar da iska: ƙayyadaddun bayanai 2400*3300 (0.036), ƙayyadaddun bayanai 3200*4260 (0.04688), ƙayyadaddun bayanai2600*2840 (0.03312). Domin muna buƙatar kiyaye matsin lamba na 0.1 MPa, muna buƙatar sigogin fanka: kwararar ruwa 120-180 m/h.Matsi 0.11 MPa
6. Matakan hana tsatsa: Kamfaninmu yana amfani da fenti mai zafin jiki mai hana tsatsa don fenti.
7. Matakan magudanar ruwa: Magudanar ruwa daga rijiyoyin magudanar ruwa na asali, babu ƙarin na'urorin magudanar ruwa
| Matsi na Al'ada | 0.05 Mpa | 0.1 Mpa | 0.05 Mpa | 0.25 Mpa |
| Matsi na Gwaji na Rufewa | 0.055 Mpa | 0.11 Mpa | 0.165 Mpa | 0.275 Mpa |
| Matsi na Gwaji na Shell | 0.075 Mpa | 0.15 Mpa | 0.225 Mpa | 0.375 Mpa |
| Gwajin Mai | 4-6 Mpa | |||
| Kayan Hatimi | NBR | Rufin Silicon | VITON | Kujerar ƙarfe |
| Zafin Jiki Mai Dacewa | -20 – 100°C | -20 – 200°C | -200 – 300°C | -20 – 450°C |
| Kafofin Watsa Labarai Masu Dacewa | Iska, iskar gas ta kwal, iskar gas mai ƙura da sauransu. | |||
Lura: Ana iya tsara shi azaman buƙatar abokin ciniki. Da fatan za a tuntuɓe mu don takamaiman zane da girma.
