100% Original Low Price Gate Valve Pn16 - 100X Hydraulic float control valve for water level – Jinbin Valve
100% Original Low Price Gate Valve Pn16 - 100X Hydraulic float control valve for water level – Jinbin Valve Detail:
Remote control float valve
Size: DN 50 – DN 600
Flange drilling is suitable for BS EN1092-2 PN10/16.
Epoxy fusion coating.
|
Working Pressure |
10 bar |
16 bar |
|
Testing Pressure |
Shell: 15 bars; Seat: 11 bar. |
Shell: 24bars; Seat: 17.6 bar. |
|
Working Temperature |
10°C to 120°C |
|
|
Suitable Media |
Water, oil & gas. |
|
The test media is water in room temperature.
|
No. |
Part |
Material |
|
1 |
Body |
Ductile iron |
|
2 |
Bonnet |
Ductile iron |
|
3 |
Seat |
Brass |
|
4 |
Wedge coating |
EPDM / NBR |
|
5 |
Disc |
Ductile iron+NBR |
|
6 |
Stem |
(2 Cr13) /20 Cr13 |
|
7 |
Plug Nut |
Brass |
|
8 |
Pipe |
Brass / Stainless steel |
|
9 |
Ball/Needle/Pilot |
Brass / Stainless steel |
If need the drawing details, please feel free to contact.
Feature:
1. Work stable and reliable and big flow pass.
2. Disc open quickly and close slowly without water hammer.
3. High precision reducing regulator with large range.
4. Sealing performance and long service life.
1. Recommend to install exhuast valve in pipe system to make sure the steady working.
2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)
Product detail pictures:
Related Product Guide:
Bypass Valves Market to Witness Huge Growth by 2025: Key Players – KSB, IMI Critical, Taco, Honeywell | Flange Spring No Return Check Valve
Everything You Need to Know About Aftermarket Carburetors | Grooved Butterfly Valve
Assume full responsibility to meet all demands of our clients; achieve continuous advancements by promoting the growth of our clients; become the final permanent cooperative partner of clients and maximize the interests of clients for 100% Original Low Price Gate Valve Pn16 - 100X Hydraulic float control valve for water level – Jinbin Valve , The product will supply to all over the world, such as: Australia, Slovenia, Comoros, We've been always creating new technology to streamline the production, and give products with competitive prices and high quality! Customer satisfaction is our priority! You can let us know your idea to develop unique design for your own model to prevent too much similar parts in the market! We are going to present our best service to satisfy all your needs! Remember to contact us right away!
By Louise from Jordan - 2017.02.18 15:54
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Doris from Sydney - 2017.06.16 18:23
