2017 Latest DesignTypes Of Pneumatic Valves - Pneumatic Eccentric semi-ball valve – Jinbin Valve
2017 Latest DesignTypes Of Pneumatic Valves - Pneumatic Eccentric semi-ball valve – Jinbin Valve Detail:
Pneumatic actuated Eccentric half Ball Valve
Size: DN50-DN2000
1. Design as GB/T12237.
2. Face-to-Face dimension conforms to ISO 5752.
3. Flange drilling is suitable for BS EN1092-2 PN10 / PN16/PN25.
4. Test as ISO5208.
|
Nominal Presesure (MPA) |
Shell Test | Water Seal Test |
| Mpa | Mpa | |
|
1.0 |
1.5 | 1.1 |
|
1.6 |
2.4 | 1.76 |
|
No. |
Part |
Material |
|
1 |
Body/Wedge |
Carbon steel (WCB)/CF8/ CF8M |
|
2 |
Stem |
SS416 (2Cr13) / F304/F316 |
|
3 |
Seat |
SS/Stellite |
|
4 |
Ball |
Alloy steel / SS |
|
5 |
Packing |
(2 Cr13) X20 Cr13 |
The eccentric ball valve is the ideal equipment for spray pulverized coal, coke oven gas, dusty gas and granular fluid. It is widely used in metallurgy industries. There are following charcters.
1. Straight, single seal, eccentric structure is particularly used for two-phase flow of spray pulvereized coal injection medium. It will not be unobstructed flow and stuck phenomennon.
2. There is compensation dosage of seal to make sure the long time usage.
3. It is easy to change the seat to avoid the change of whole valve.
Product detail pictures:
Related Product Guide:
Sony Seemingly Censors Controversial Senran Kagura Mode | Flange Spring No Return Check Valve
RHI Magnesita (LON:RHIM) Earns “Buy” Rating from Peel Hunt | Check Valve Dn100
Adhering into the basic principle of "quality, assistance, effectiveness and growth", we have attained trusts and praises from domestic and worldwide client for 2017 Latest DesignTypes Of Pneumatic Valves - Pneumatic Eccentric semi-ball valve – Jinbin Valve , The product will supply to all over the world, such as: Gabon, Brazil, Uganda, At Present, our merchandise have been exported to more than sixty countries and different regions, such as Southeast Asia, America, Africa, Eastern Europe, Russia, Canada etc. We sincerely hope to establish wide contact with all potential customers both in China and the rest part of the world.
By jari dedenroth from Malaysia - 2017.09.22 11:32
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.
By Barbara from Durban - 2017.11.01 17:04
