Discount wholesale 10 Inch Check Valve - API Carbon steel globe valve – Jinbin Valve
Discount wholesale 10 Inch Check Valve - API Carbon steel globe valve – Jinbin Valve Detail:
API steel flange globe valve:
API Cast steel flange globe valves are made of movable plugas disc with flat or conical surface sealing to seal. Normally, the plug isconnected to a stem which is operated by screw action as a straight line usinga hand wheels. Normally, this kind of globe valves just used for full open and full closing, do not for flow regulation. The pressure is from Class 150 toClass 600 and working temperature is from -29 to 450 degree. This steel globe valves arewidely used for petroleum, chemical, pharmacy, chemical and powder industriespipelines to throttle the media. There are hand wheel, bevel gear, electric andpneumatic actuated actuators.
Design standard: BS 1873/ASME B16.34
Face-to-face dimension: ASME B16.10
Flange ends dimensions: ASME B16.50
Working Pressure |
10 bar / 16 bar/150lb |
Testing Pressure |
Shell: 1.5 times rated pressure, Seat: 1.1 times rated pressure. |
Working Temperature |
-10°C to 120°C (EPDM) -10°C to 150°C (PTFE) |
Suitable Media |
Water, Oil, and gas. |
Parts |
Materials |
Body |
cast steel |
Disc |
Stainless steel, ductile iron |
Seat |
EPDM / NBR / VITON / PTFE |
Stem |
Stainless steel,2Cr13 |
Bushing |
PTFE |
“O” ring |
PTFE |
Pin |
Stainless steel |
Key |
Stainless steel |
Product detail pictures:
Related Product Guide:
Ram Multifunction Tailgate vs Ford, GMC, and Honda | Check Valve Dn100
Radios: Build your own! | Flange Spring No Return Check Valve
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Discount wholesale 10 Inch Check Valve - API Carbon steel globe valve – Jinbin Valve , The product will supply to all over the world, such as: Cyprus, Manchester, Comoros, Our company abides by the management idea of "keep innovation, pursue excellence". On the basis of assuring the advantages of existing products, we continuously strengthen and extend product development. Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
By Jane from Poland - 2018.02.21 12:14
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Sarah from Paraguay - 2017.10.13 10:47