China factory customized Lug Knife Gate Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve Manufacturer and Supplier

factory customized Lug Knife Gate Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve

Short Description:

Pneumatic actuated Eccentric half Ball Valve Size: DN50-DN2000 1. Design as GB/T12237. 2. Face-to-Face dimension conforms to ISO 5752. 3. Flange drilling is suitable for BS EN1092-2 PN10 / PN16/PN25. 4. Test as ISO5208. Nominal Presesure (MPA) Shell Test Water Seal Test Mpa Mpa 1.0 1.5 1.1 1.6 2.4 1.76 No. Part Material 1 Body/Wedge Carbon steel (WCB)/CF8/ CF8M 2 Stem SS416 (2Cr13) / F304/F316 3 Seat SS/Stellite 4 Ball Alloy stee...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

Our company aims to operating faithfully, serving to all of our customers , and working in new technology and new machine constantly for Basket Strainers Manufacturers , Electric Blind Valve , Strainer Y Type , We sincerely hope to provide you and your company with a great start. If there is anything we will do to suit your needs, we shall be additional than pleased to do so. Welcome to our manufacturing facility for stop by.

factory customized Lug Knife Gate Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve Detail:

Pneumatic actuated Eccentric half Ball Valve

Pneumatic Eccentric semi-ball valve

Size: DN50-DN2000

1. Design as GB/T12237.

2. Face-to-Face dimension conforms to ISO 5752.

3. Flange drilling is suitable for BS EN1092-2 PN10 / PN16/PN25.

4. Test as ISO5208.

Pneumatic Eccentric semi-ball valve

Nominal Presesure (MPA)	Shell Test	Water Seal Test
Nominal Presesure (MPA)	Mpa	Mpa
1.0	1.5	1.1
1.6	2.4	1.76

Pneumatic Eccentric semi-ball valve

No.	Part	Material
1	Body/Wedge	Carbon steel (WCB)/CF8/ CF8M
2	Stem	SS416 (2Cr13) / F304/F316
3	Seat	SS/Stellite
4	Ball	Alloy steel / SS
5	Packing	(2 Cr13) X20 Cr13

Pneumatic Eccentric semi-ball valve

The eccentric ball valve is the ideal equipment for spray pulverized coal, coke oven gas, dusty gas and granular fluid. It is widely used in metallurgy industries. There are following charcters.

1. Straight, single seal, eccentric structure is particularly used for two-phase flow of spray pulvereized coal injection medium. It will not be unobstructed flow and stuck phenomennon.

2. There is compensation dosage of seal to make sure the long time usage.

3. It is easy to change the seat to avoid the change of whole valve.

Pneumatic Eccentric semi-ball valve

Product detail pictures:

Related Product Guide:
Fire protection pumps: Updates to NFPA 20 – Consulting | Rising Stem Type Gate Valve
Steam’s content policy is both arrogant and cowardly • Eurogamer.net | Grooved Butterfly Valve

With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for factory customized Lug Knife Gate Valve - Pneumatic Eccentric semi-ball valve – Jinbin Valve , The product will supply to all over the world, such as: Curacao, Canada, New Delhi, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.

304 Stainless Steel Slide Gate

Cast Iron Valve

Check Valve For Compressed Air

Knife Gate Valve

Line Blind Valves

Ventilated Butterfly Control Valve

It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!

By Princess from Miami - 2017.09.09 10:18

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.

By Natividad from Guatemala - 2017.09.22 11:32