Factory supplied Manual Sluice Gate - Pressure regulating valve – Jinbin Valve
Factory supplied Manual Sluice Gate - Pressure regulating valve – Jinbin Valve Detail:
Adjustable pressure reducing valve
200X pressure reducing valves automatically
reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure.
This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.
Size: DN50 – DN600
Flange drilling is suitable for BS EN1092-2 PN10/16.
Epoxy fusion coating.
Working Pressure |
10 bar |
16 bar |
Testing Pressure |
Shell: 15 bars; Seat: 11 bar. |
Shell: 24bars; Seat: 17.6 bar. |
Working Temperature |
10°C to 120°C |
|
Suitable Media |
Water, oil & gas. |
Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.
No. |
Part |
Material |
1 |
Body |
Ductile iron/Carbon steel |
2 |
Bonnet |
Ductile iron/Carbon steel |
3 |
Seat |
Brass |
4 |
Wedge coating |
EPDM / NBR |
5 |
Disc |
Ductile iron+NBR |
6 |
Stem |
(2 Cr13) /20 Cr13 |
7 |
Plug Nut |
Brass |
8 |
Pipe |
Brass |
9 |
Ball/Needle/Pilot |
Brass |
If need the drawing details, please feel free to contact.
1. Work stable and reliable and big flow pass.
2. Disc open quickly and close slowly without water hammer.
3. High precision reducing regulator with large range.
4. Sealing performance and long service life.
Installation Requirements:
1. Recommend to install exhuast valve in pipe system to make sure the steady working.
2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)
Product detail pictures:
Related Product Guide:
Evaluating Friction and Anti-Galling of Hardmetals in Severe Sliding Contact Applications | Check Valve Dn100
Steam’s content policy is both arrogant and cowardly • Eurogamer.net | Check Valve Dn100
As for aggressive rates, we believe that you will be searching far and wide for anything that can beat us. We can easily state with absolute certainty that for such good quality at such charges we are the lowest around for Factory supplied Manual Sluice Gate - Pressure regulating valve – Jinbin Valve , The product will supply to all over the world, such as: Irish, Luxembourg, Argentina, By integrating manufacturing with foreign trade sectors, we can provide total customer solutions by guaranteeing the delivery of right products to the right place at the right time, which is supported by our abundant experiences, powerful production capability, consistent quality, diversified products and the control of the industry trend as well as our maturity before and after sales services. We'd like to share our ideas with you and welcome your comments and questions.
By Geraldine from Plymouth - 2018.06.26 19:27
The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.
By Austin Helman from Costa Rica - 2018.12.14 15:26