China Good quality Metal Sluice Gate Valve - Pressure regulating valve – Jinbin Valve Manufacturer and Supplier

Good quality Metal Sluice Gate Valve - Pressure regulating valve – Jinbin Valve

Short Description:

Adjustable pressure reducing valve 200X pressure reducing valves automatically reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight. Size: DN50 – DN600 Flange dril...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

we could supply good quality goods, aggressive cost and very best purchaser assistance. Our destination is "You come here with difficulty and we supply you with a smile to take away" for Dn50 Pneumatic Actuator Ball Valve , Goggle Valve , Cast Iron Y Type Strainers , We're self-assured to create wonderful achievements while in the potential. We've been hunting forward to becoming one of your most trustworthy suppliers.

Good quality Metal Sluice Gate Valve - Pressure regulating valve – Jinbin Valve Detail:

Adjustable pressure reducing valve

Pressure regulating valve

200X pressure reducing valves automatically Pressure regulating valve

reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure.

This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

Size: DN50 – DN600

Flange drilling is suitable for BS EN1092-2 PN10/16.

Epoxy fusion coating.

Pressure regulating valve

Working Pressure	10 bar	16 bar
Testing Pressure	Shell: 15 bars; Seat: 11 bar.	Shell: 24bars; Seat: 17.6 bar.
Working Temperature	10°C to 120°C
Suitable Media	Water, oil & gas.

Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.

Pressure regulating valve

No.	Part	Material
1	Body	Ductile iron/Carbon steel
2	Bonnet	Ductile iron/Carbon steel
3	Seat	Brass
4	Wedge coating	EPDM / NBR
5	Disc	Ductile iron+NBR
6	Stem	(2 Cr13) /20 Cr13
7	Plug Nut	Brass
8	Pipe	Brass
9	Ball/Needle/Pilot	Brass

If need the drawing details, please feel free to contact.

Pressure regulating valve

1. Work stable and reliable and big flow pass.

2. Disc open quickly and close slowly without water hammer.

3. High precision reducing regulator with large range.

4. Sealing performance and long service life.

Installation Requirements:

1. Recommend to install exhuast valve in pipe system to make sure the steady working.

2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)

Product detail pictures:

Related Product Guide:
Deep Breathing with YearOne and Accurate Exhaust Products for Mopars | Check Valve Dn100
Demand for Cryogenic Valve Increasing due to Growing Offshore and Inland Transportation of Gases | Check Valve Dn100

Our goal is to satisfy our customers by offering golden service, good price and high quality for Good quality Metal Sluice Gate Valve - Pressure regulating valve – Jinbin Valve , The product will supply to all over the world, such as: Belgium, Paris, Mali, With good quality, reasonable price and sincere service, we enjoy a good reputation. Products are exported to South America, Australia, Southeast Asia and so on. Warmly welcome customers at home and abroad to cooperate with us for the brilliant future.

42 Inch Gate Valve