China Manufacturer for Wafer Butterfly Valve - Pressure regulating valve – Jinbin Valve Manufacturer and Supplier

Manufacturer for Wafer Butterfly Valve - Pressure regulating valve – Jinbin Valve

Short Description:

Adjustable pressure reducing valve 200X pressure reducing valves automatically reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight. Size: DN50 – DN600 Flange drill...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

The organization keeps on the procedure concept "scientific management, high quality and efficiency primacy, purchaser supreme for Double Offset Butterfly Valve , Pneumatic Actuated Butterfly Valve , Large Size Double Flange Butterfly Valve , We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!

Manufacturer for Wafer Butterfly Valve - Pressure regulating valve – Jinbin Valve Detail:

Adjustable pressure reducing valve

Pressure regulating valve

200X pressure reducing valves automatically Pressure regulating valve

reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure.

This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

Size: DN50 – DN600

Flange drilling is suitable for BS EN1092-2 PN10/16.

Epoxy fusion coating.

Pressure regulating valve

Working Pressure	10 bar	16 bar
Testing Pressure	Shell: 15 bars; Seat: 11 bar.	Shell: 24bars; Seat: 17.6 bar.
Working Temperature	10°C to 120°C
Suitable Media	Water, oil & gas.

Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.

Pressure regulating valve

No.	Part	Material
1	Body	Ductile iron/Carbon steel
2	Bonnet	Ductile iron/Carbon steel
3	Seat	Brass
4	Wedge coating	EPDM / NBR
5	Disc	Ductile iron+NBR
6	Stem	(2 Cr13) /20 Cr13
7	Plug Nut	Brass
8	Pipe	Brass
9	Ball/Needle/Pilot	Brass

If need the drawing details, please feel free to contact.

Pressure regulating valve

1. Work stable and reliable and big flow pass.

2. Disc open quickly and close slowly without water hammer.

3. High precision reducing regulator with large range.

4. Sealing performance and long service life.

Installation Requirements:

1. Recommend to install exhuast valve in pipe system to make sure the steady working.

2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)

Product detail pictures:

Related Product Guide:
2019 Ducati Multistrada 950 Guide • Total Motorcycle | Flange Spring No Return Check Valve
Global Regulating Valve Market Analysis Report 2019-2024: Regulator, Adams Valve, HOKE, Casco, Jordan Valve, Red And White Valve, Eminem | Grooved Butterfly Valve

We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for Manufacturer for Wafer Butterfly Valve - Pressure regulating valve – Jinbin Valve , The product will supply to all over the world, such as: St. Petersburg, Melbourne, Hanover, If you give us a list of products you are interested in, along with makes and models, we can send you quotations. Please email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.

Flange Type Check Valve