English

Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve

Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Featured Image
  • Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve

Short Description:

Heavy Hammer Plug-in Valve sluice damper Technical Description of Heavy Hammer Plug Valve 1. Valve control way: field control, remote control 2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight) 3. Valve control mode: Windlass 4. Working time: 10-20s 5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by ...


Email WhatsApp

Product Detail

Product Tags

Related Video

Feedback (2)

That has a positive and progressive attitude to customer's interest, our organization consistently improves our products quality to satisfy the demands of shoppers and further focuses on safety, reliability, environmental specifications, and innovation of Pipe Stop Valve , Flanged Globe Valve , 10 Inch Pneumatic Butterfly Valve , Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!
Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Detail:

Heavy Hammer Plug-in Valve sluice damperSlide damper gate valve

Technical Description of Heavy Hammer Plug Valve

1. Valve control way: field control, remote control

2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight)

3. Valve control mode: Windlass

4. Working time: 10-20s

5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by the demander.Gas flow basis: the clearance between the valve plate and both sides of the valve body is 2 mm, and then multiplied by the length of the required seal, thus the air outlet area is calculated. Air outlet area: specification 2400*3300 (0.036), specification 3200*4260 (0.04688), specification2600*2840 (0.03312). Because we need to maintain the pressure of 0.1 MPa, we need fan parameters: flow 120-180 m/h. Pressure 0.11 MPa

6. Anti-corrosion measures: Our company uses high-temperature anti-corrosion paint for painting.

7. Drainage measures: Drainage from the original chimney drainage wells, no additional drainage devices

Slide damper gate valve

Norminal Pressure 0.05 Mpa 0.1 Mpa 0.05 Mpa 0.25 Mpa
Sealing Test Pressure 0.055 Mpa 0.11 Mpa 0.165 Mpa 0.275 Mpa
Shell Test Pressure 0.075 Mpa 0.15 Mpa 0.225 Mpa 0.375 Mpa
Oil Test 4-6 Mpa
Sealing Materials NBR Silicon Rubber VITON Metal seat
Suitable Temperature -20 – 100°C -20 – 200°C -200 – 300°C -20 – 450°C
Suitable Media Air, coal gas, dusty gas etc.

Note: It can be desinged as customer’s requirment. Please contact for the specificed drawing and dimension.

Slide damper gate valve

Product detail pictures:

Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve detail pictures

Related Product Guide:
Deep Breathing with YearOne and Accurate Exhaust Products for Mopars | Check Valve Dn100
Sonoma County sees rise in neighborhood disaster preparedness groups since wildfires | Grooved Butterfly Valve
We always continually offer you the most conscientious purchaser services, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Special Design for 6 Inch Strainer - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve , The product will supply to all over the world, such as: America, Plymouth, South Africa, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.

    • The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Dorothy from Jordan - 2017.08.18 11:04
    This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
    5 Stars By Lynn from Kuwait - 2017.01.28 18:53

    Products categories