China Trending ProductsPump Strainer Basket - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Manufacturer and Supplier

Trending ProductsPump Strainer Basket - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve

Short Description:

Heavy Hammer Plug-in Valve sluice damper Technical Description of Heavy Hammer Plug Valve 1. Valve control way: field control, remote control 2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight) 3. Valve control mode: Windlass 4. Working time: 10-20s 5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

The purchaser fulfillment is our primary focus on. We uphold a consistent level of professionalism, high quality, credibility and service for Ball Valve , Flange Type Ball Valve , Triple Eccentric Butterfly Valve , Our aim is "blazing new ground, Passing Value", in the future, we sincerely invite you to grow up with us and make a bright future together!

Trending ProductsPump Strainer Basket - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve Detail:

Heavy Hammer Plug-in Valve sluice damper

Slide damper gate valve

Technical Description of Heavy Hammer Plug Valve

1. Valve control way: field control, remote control

2. Valves are cut off in emergency and automatically opened by heavy hammer (counterweight)

3. Valve control mode: Windlass

4. Working time: 10-20s

5. Valve seal form: gas seal, high pressure (0.1Mpa) gas is injected from the outer end to form an airtight passage between the valve plate and the door frame， and sealing is achieved. Fans are provided by the demander.Gas flow basis: the clearance between the valve plate and both sides of the valve body is 2 mm, and then multiplied by the length of the required seal, thus the air outlet area is calculated. Air outlet area: specification 2400*3300 (0.036), specification 3200*4260 (0.04688), specification2600*2840 (0.03312). Because we need to maintain the pressure of 0.1 MPa, we need fan parameters: flow 120-180 m/h. Pressure 0.11 MPa

6. Anti-corrosion measures: Our company uses high-temperature anti-corrosion paint for painting.

7. Drainage measures: Drainage from the original chimney drainage wells, no additional drainage devices

Slide damper gate valve

Norminal Pressure	0.05 Mpa	0.1 Mpa	0.05 Mpa	0.25 Mpa
Sealing Test Pressure	0.055 Mpa	0.11 Mpa	0.165 Mpa	0.275 Mpa
Shell Test Pressure	0.075 Mpa	0.15 Mpa	0.225 Mpa	0.375 Mpa
Oil Test	4-6 Mpa
Sealing Materials	NBR	Silicon Rubber	VITON	Metal seat
Suitable Temperature	-20 – 100°C	-20 – 200°C	-200 – 300°C	-20 – 450°C
Suitable Media	Air, coal gas, dusty gas etc.

Note: It can be desinged as customer’s requirment. Please contact for the specificed drawing and dimension.

Slide damper gate valve

Product detail pictures:

Related Product Guide:
Ram Multifunction Tailgate vs Ford, GMC, and Honda | Check Valve Dn100
Global Regulating Valve Market Analysis Report 2019-2024: Regulator, Adams Valve, HOKE, Casco, Jordan Valve, Red And White Valve, Eminem | Rising Stem Type Gate Valve

The key to our success is "Good Product Excellent, Reasonable Rate and Efficient Service" for Trending ProductsPump Strainer Basket - Heavy Hammer Plug-in Valve sluice damper – Jinbin Valve , The product will supply to all over the world, such as: Lisbon, Canada, Colombia, Whether selecting a current product from our catalog or seeking engineering assistance for your application, you can talk to our customer service center about your sourcing requirements. We are looking forward to cooperating with friends from all over the world.

10 Inch Butterfly Valve