Wholesale Price China Float Ball Valve - Cs Motorised Flow Control Gate – Jinbin Valve
Wholesale Price China Float Ball Valve - Cs Motorised Flow Control Gate – Jinbin Valve Detail:
Cs Motorised Flow Control Gate
The Cs Motorised Flow Control Gate is widely used in building materials, metallurgy, chemical industry, electric power and other industries.
The Cs Motorised Flow Control Gate is used as the discharge device of ash hopper of all kinds of equipment and the feeding and discharging device of various grinding machines, dryers and silos to prevent the wind from blowing in.
The Cs Motorised Flow Control Gate valve plate has two sealing surfaces. The two sealing surfaces of the most commonly used mode gate valve form a wedge. The wedge angle varies with the valve parameters, which is usually 50. The wedge gate of the wedge gate valve can be made into a whole, which is called rigid gate; it can also be made into a ram which can produce slight deformation, so as to improve its processability and make up for the deviation of sealing surface angle in the processing process, This kind of gate is called elastic gate plug valve. When closing, the sealing surface can only rely on the medium pressure to seal, that is, the sealing surface of the gate will be pressed to the seat on the other side to ensure the sealing of the sealing surface. This is self sealing. Most of the plug-in valves are forced to seal, that is, when the valve is closed, the ram should be forced to the valve seat by external force to ensure the sealing performance of the sealing surface.
Size | 150*150-800*800 |
Strength test pressure | 0.15mpa |
Suitable medium | Solid particles, dust |
Suitable temperature | ≤300℃ |
Leakage rate | ≤1% |
Discharge capacity | 1.5-250m3/h |
1. Use feeler gauge to measure the average clearance of each point ≤ 0.12mm.
2. Adjust the thickness of part No. 13 to ensure the axial fit of the shaft.
3. According to the required pressure of valve plate, adjust the distance of iron distribution on the crank to achieve accurate opening and closing without jamming.
4. After the valve assembly is qualified, rivet the thread of Part 20 to prevent loosening.
5. The non machined surface shall be coated with anti rust primer twice, and then the top coat (gray paint) shall be sprayed twice.
Body | Carbon steel |
disc | Carbon steel |
Heavy hammer | Carbon steel |
Electric actuator |
Product detail pictures:
Related Product Guide:
Allen Park-based EcoMotors to use funding to build more-efficient diesel engine CRAINS-DETROIT-horizontal-red-wht CRAINS-DETROIT-horizontal-red-wht | Flange Spring No Return Check Valve
Emily Greer: “New stores are changing the expectation that only Steam matters” | Flange Spring No Return Check Valve
We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Wholesale Price China Float Ball Valve - Cs Motorised Flow Control Gate – Jinbin Valve , The product will supply to all over the world, such as: Florence, Argentina, Argentina, The company attaches great importance to product quality and service quality, based on the business philosophy "good with people, genuine to whole world, your satisfaction is our pursuit". we design products, According to customer's sample and requirements, to meet the needs of the market and offer different customers with personalized service. Our company warmly welcomes friends at home and abroad to visit, to discuss cooperation and seek common development!
By Lilith from Munich - 2018.07.26 16:51
We have been looking for a professional and responsible supplier, and now we find it.
By Jamie from Bulgaria - 2018.04.25 16:46