China Factory making Non-Return Valve - Pressure regulating valve – Jinbin Valve Manufacturer and Supplier

Factory making Non-Return Valve - Pressure regulating valve – Jinbin Valve

Short Description:

Adjustable pressure reducing valve 200X pressure reducing valves automatically reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight. Size: DN50 – DN600 Flange dril...

Send email to us Email WhatsApp

Product Detail

Product Tags

Feedback (2)

We believe in: Innovation is our soul and spirit. Quality is our life. Shopper need is our God for Signal Butterfly Valve , Rotary Valve , Electric Actuator Butterfly Valve , We can easily offer you by far the most aggressive prices and good quality, because we've been much additional Specialist! So please will not hesitate to call us.

Factory making Non-Return Valve - Pressure regulating valve – Jinbin Valve Detail:

Adjustable pressure reducing valve

Pressure regulating valve

200X pressure reducing valves automatically Pressure regulating valve

reduce and regulate a higher inlet pressure to a steady lower downstream pressure, regardless of chaning flow rate and varying inlet pressure.

This valve is an accurate, pilot-operated regulator capable of holding down steam pressure to a re-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the main valve and pilot valve close drip-tight.

Size: DN50 – DN600

Flange drilling is suitable for BS EN1092-2 PN10/16.

Epoxy fusion coating.

Pressure regulating valve

Working Pressure	10 bar	16 bar
Testing Pressure	Shell: 15 bars; Seat: 11 bar.	Shell: 24bars; Seat: 17.6 bar.
Working Temperature	10°C to 120°C
Suitable Media	Water, oil & gas.

Shell and seal tests for each valve is done and recorded before package to make sure the product quality. The test media is water in room conditions.

Pressure regulating valve

No.	Part	Material
1	Body	Ductile iron/Carbon steel
2	Bonnet	Ductile iron/Carbon steel
3	Seat	Brass
4	Wedge coating	EPDM / NBR
5	Disc	Ductile iron+NBR
6	Stem	(2 Cr13) /20 Cr13
7	Plug Nut	Brass
8	Pipe	Brass
9	Ball/Needle/Pilot	Brass

If need the drawing details, please feel free to contact.

Pressure regulating valve

1. Work stable and reliable and big flow pass.

2. Disc open quickly and close slowly without water hammer.

3. High precision reducing regulator with large range.

4. Sealing performance and long service life.

Installation Requirements:

1. Recommend to install exhuast valve in pipe system to make sure the steady working.

2. Pressure of inlet should not less than 0.2Mpa. If it does, the performance will be worse. (Pressure tolerance of outlet will increase.)

Product detail pictures:

Related Product Guide:
Bike Check: Joshua Barth’s Solid Strike – European DH Cup 2018 | Flange Spring No Return Check Valve
Lorenz Acquires Flow Valves International : Plastics Technology | Flange Spring No Return Check Valve

We normally follow the basic principle "Quality Initial, Prestige Supreme". We've been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Factory making Non-Return Valve - Pressure regulating valve – Jinbin Valve , The product will supply to all over the world, such as: Morocco, Hungary, Bahrain, Many products fully conform to the most rigorous of international guidelines and with our first-rate delivery service you will have them delivered at any time and in any place. And because Kayo deals in the entire spectrum of protective equipment, our customers don't need to waste time shopping around.

Duckbill Rubber Check Valve