stainless steel wall mounted sluice gate valve/water penstock with drawing
stainless steel sluice gate valve/water penstock with drawing
This valve are mainly used in sewage treatment plants, waterplants, drainage and irrigation, environmental protection,
electricity, channel and other projects to cut off, regulate flow, and control water levels. Can be divided into four types
1.channel type, used in the middle of the channel, three-way sealing
2.Wall type:used in inlet and outlet of wall for open or close,four way seal
3.Adjusting type: for adjusting the size of the water flow
2.Wall type:used in inlet and outlet of wall for open or close,four way seal
3.Adjusting type: for adjusting the size of the water flow
4. Weir type:for adjusting water level. The sluice gate valve is corrosion resistant, has good sealing performance, long life and easy maintenance.
Specification:
Size
|
DN100-DN4000
|
Pressure
|
0.05Mpa/0.1Mpa/0.15Mpa/0.25Mpa
|
Design standard
|
ISO10631/JB/T8692
|
Test standard
|
GB/T13927/ API598/ISO5208
|
Type:
|
Channel type/wall type
|
Temperature:
|
≤80℃
|
Working head
|
head pressure≤10m-H2O,back pressre≤2m-H2O
|
Actuator:
|
Manual/electric/penufactic
|
Standard
|
Customer require
|
Medium
|
Water, sewage,sea water,acid media
|
MOQ
|
1Set
|
Body
|
Carbon steel/SS/cast steel/super duplex alloys
|
Gate
|
Carbon steel/SS/cast steel/super duplex alloys
|
Shaft
|
SS304/SS316/SS416
|
Sealing
|
EPDM/NBR/brass/bronze
|
Bolts&Nuts
|
Stainless steel
|
Please fell free to contact us to get the technical drawing.
Write your message here and send it to us